澳门·新莆京(中国)游戏官网-正版App Store

您好,欢迎来到澳门正版新莆京游戏网站!

服务热线

当前位置: 首页- 新闻中心 > 公司动态
常见问题
新闻中心

低压抽屉柜的产品特点以及使用条件

发布时间:2023-03-17 来源:/ 浏览量:

在低压成套电气开关设备系列产品中,MNS低压抽屉柜,以下简称MNS低压柜,是为常用的低压开关柜,下面和小编一起来了解下它吧。
In the series of low-voltage complete electrical switchgear products, MNS low-voltage drawer cabinet, hereinafter referred to as MNS low-voltage cabinet, is a commonly used low-voltage switchgear. Let's take a look at it with my editor.
MNS低压抽屉柜是一种用标准模件由工厂组装(FBA)的组合式柜型。适用于发电厂、变电站、石油化工、冶金轧钢交通能源、住宅小区等场所的配电之用,作为交流50~60Hz,额定工作电压交流660V及以下的电力系统的配电设备的电能转化、分配以及控制之用。
MNS low-voltage drawer cabinet is a factory assembled (FBA) modular cabinet type using standard modules. It is suitable for power distribution in power plants, substations, petrochemical, metallurgical, steel rolling, transportation, energy, residential areas, and other places. It is used for power conversion, distribution, and control of power distribution equipment in power systems with AC 50~60Hz and rated working voltage AC 660V and below.
MNS低压抽屉柜的产品特点:
Product features of MNS low-voltage drawer cabinet:
开关柜设计紧凑,能够以较小的空间容纳更多的功能单元。
The switch cabinet is compact in design and can accommodate more functional units in a smaller space.
其结构通用性强、组装更为灵活。以25mm为模数的C型型材满足各种结构形式、防护等级及使用环境的要求。
Its structure has strong versatility and more flexible assembly. The C-shaped profile with a modulus of 25mm meets the requirements of various structural forms, protection levels, and use environments.
开关柜采用标准模块设计,分别可以组成保护、操作、转换、控制、调节、测定、指示等标准单元,用户可根据需要任意选择组装。以200余种组装件可以组装不同方案的柜架结构和组成固定分隔或者抽屉单元。
The switch cabinet is designed with standard modules, which can form standard units for protection, operation, conversion, control, regulation, measurement, and indication. Users can choose to assemble them as needed. More than 200 types of assembly components can be used to assemble different cabinet frame structures and form fixed partitions or drawer units.
MNS低压抽屉柜
低压柜的上,大量采用高强度阻燃型的工程塑料组件,有效地加强防护性能。
For the safety of low-voltage cabinets, a large number of high-strength flame-retardant engineering plastic components are used to effectively enhance safety protection performance.
MNS低压抽屉柜的三化程度高,可大大的压缩储存和运输预制件的场地。
The MNS low-voltage drawer cabinet has a high degree of standardization, which can greatly compress the space for storing and transporting prefabricated parts.
MNS低压抽屉柜的使用条件:
Service conditions of MNS low-voltage drawer cabinet:
周围空间温度不高于40℃,不低于-5℃,并且24h平均温度不高于35℃
The temperature of the surrounding space is not higher than 40 ℃, not lower than - 5 ℃, and the 24-hour average temperature is not higher than 35 ℃
周围空气清洁,相对湿度在高温度为40℃时候不超过50%,在较低温度时候允许有较高的相对湿度。
The ambient air is clean, and the relative humidity does not exceed 50% at high temperatures of 40 ℃. Higher relative humidity is allowed at lower temperatures.
户内使用,海拔高度不超过2000m;在无显著摇动和冲击震动的地方
For indoor use, the altitude shall not exceed 2000m; In a place without significant shaking and shock vibration
污染等级为3级;抗震等级为8级。
The pollution level is Level 3; The seismic rating is Level 8.
开关柜的运输和存储过程中的温度可在-25℃55℃,在短时间内的温度可达到70℃。
The temperature of the switchgear during transportation and storage can range from - 25 ℃ to 55 ℃, and the temperature can reach 70 ℃ in a short period of time.
MNS低压抽屉柜的柜体基本结构是由C型型材压制组装而成。内层隔板均作了镀锌处理。四周门板、侧板均作粉末喷涂处理,有效的安装高度为72E。您对此还有什么事项要了解的就来我们网站看看吧!
The basic structure of the MNS low-voltage drawer cabinet is formed by pressing and assembling C-shaped profiles. The inner partition is galvanized. The surrounding door panels and side panels are powder coated, with an effective installation height of 72E. If you have anything else to learn about this, please come to our website Look!
首页首页 产品产品 电话电话 置顶置顶
XML 地图