澳门·新莆京(中国)游戏官网-正版App Store

您好,欢迎来到澳门正版新莆京游戏网站!

服务热线

当前位置: 首页- 新闻中心 > 公司动态
常见问题
新闻中心

电气成套设备的进线开关如何有效保养?

发布时间:2023-02-03 来源:/ 浏览量:

电气成套设备日常多保养多检修,就能延长机器的使用寿命,还能给自己省不少人力和物力,比如维修费用等。那么你知道电气成套设备的进线开关如何有效保养吗?
More maintenance and overhaul of the complete electrical equipment can extend the service life of the machine and save yourself a lot of manpower and material resources, such as maintenance costs. Do you know how to effectively maintain the incoming switch of the complete electrical equipment?
1.检查设备的清洁程度,使用清洁的干布擦掉任何灰尘和油迹,可能的情况下可使用非腐蚀性洗涤剂。
1. Check the cleanliness of the equipment, wipe off any dust and oil stains with a clean dry cloth, and use non-corrosive detergent if possible.
2.检查电气成套设备铭牌是否完好。使用清洁干布半角这些铭牌清洁干净。
2. Check whether the nameplate of complete electrical equipment is intact. Use a clean dry cloth to clean half of these nameplates.
3.擦掉灰尘、霉菌和氧化物,同时也要清洁抽出式断路器的固定部分内部。确保断路器室内无异物。
3. Wipe off dust, mold and oxides, and also clean the inside of the fixed part of the draw-out circuit breaker. Ensure that there is no foreign matter in the circuit breaker room.
电气成套
4.用清洁干的布断路器边线及母线上的灰尘或污垢。
4. Use a clean and dry cloth to remove dust or dirt on the circuit breaker side line and bus.
5.确认用于端子连接的螺栓都正确地紧固,确认端子上没有局部过热的迹象。通过观察接触部分的颜色是否改变可以识别出是否发热,接触部分通常都是银白色。
5. Confirm that the bolts used for terminal connection are correctly tightened and that there is no sign of local overheating on the terminal. The heat can be identified by observing whether the color of the contact part changes. The contact part is usually silvery white.
7.检查电气成套设备的滑动触点或端子排上的线缆是否牢固。
7. Check whether the cable on the sliding contact or terminal block of the complete electrical equipment is firm.
8.出现设置需要维修时,请认真阅读相关资料。
8. Please read the relevant information carefully when the setting needs to be repaired.
以上就是关于问问关于“电气成套设备的进线开关如何有效保养?”的相关内容如何,关注我们,为您了解事项!
The above is about asking about the relevant content of "How to effectively maintain the incoming switch of electrical complete equipment?" matter!
首页首页 产品产品 电话电话 置顶置顶
XML 地图