The special working performance of electronic cabinet leads to the selection of physical parameters such as volume, power consumption and calorific value, because electronic cabinet is usually used to deploy and manage a large number of equipment resources in large computer rooms. Computer rooms are usually equipped with strict
Measures, good air conditioning system, etc.
So how can we deploy more equipment in limited space?
Rack type electronic cabinet usually adopts the cabinet whose mechanical size meets the 19 inch industrial standard.
Rack mounted equipment also has a variety of specifications, such as 1u4.45cm high, 2U, 4U, 6U, 8U, etc
Generally, 1U rack type electronic cabinet saves space, but its performance and scalability are poor. It is suitable for some relatively fixed business areas.
Products above 4U have higher performance and good scalability, and generally support more than 4 high-performance processors and a large number of standard hot plug components.
Management is also very convenient, suitable for key applications with large visits, but the volume is large and the space utilization is not high.
1 the wiring between cabinets is generally routed from the top of the cabinet.
2. The air conditioning baffle of the cabinet must be opened to prevent the equipment from overheating and causing crash.
3 both ends of the cable shall be labeled with the number, and the label shall be clearly written.
4 if the cabinet is an internal and external network switch, try to distinguish it with two different colors of network cables.
5 for fixed installation cabinet, there shall be no reserved cable length in the cabinet. For mobile cabinet, all cables connecting the cabinet shall be reserved at least 1m at the entrance of the cabinet.
6 lines with different voltage levels and current levels shall be arranged and laid separately
7. No joint is allowed in the middle of the cable
8 when wiring the cabinet, please ensure that both ends of the power cord plug and the server power connector are fixed with label ties.
9 paste the asset number of each server and print the asset number + barcode together through the label printer. Two identical copies are printed on each server, on the front and side of the device. Signal strength and surface treatment of electronic cabinet